Pick a clear epoxy for wood that is transparent so that the filler material will look almost as good as the surrounding wood. It dries solid, therefore, guarantees structural strength. Use it for decorative purposes and not pieces that will require structural strength.Įpoxy: This is your best option if you’re making homemade wood filler to fill knots and big cracks in the wood. The filler will dry somehow but still be soft enough to dent with a finger or a craft stick. The only issue with shellac wood filler is, it won’t dry solid enough like the surrounding wood. The process of mixing it with sawdust is the same. Shellac: Shellac is better known as a wood finish. Here is the best glue to make wood filler that I recommend. Also, the filler will dry solid hard and blend in with the rest of the wood. We wouldn’t want to have the filled cracks or gaps appearing too conspicuously. It usually comes in two color tones: white and yellow glue.įor this purpose, use white wood glue so you don’t change the color of the filler so much. Wood Glue: This is one of the most common adhesives among woodworkers. Here’s a brief about the different binding agents you can mix with sawdust to make your own DIY wood filler. Therefore, we recommend white or transparent glue to have a close or exact color match with your wood project. Keep in mind that the binding agent you use will affect the color of the putty. Add more glue and continue mixing until you get putty-like consistency. Add a little wood glue and mix it with a plastic putty knife or a craft stick. Put the sawdust in a small pile on a cardboard or paper plate. Wear disposable gloves and use a craft stick, then dispose of them once you’re done
0 Comments
Leave a Reply. |